Free screen test

Dead Pixel & Monitor Test

Fill your screen with solid colors to spot dead or stuck pixels, uneven backlight and banding. Ideal for checking a new monitor or laptop before the return window closes.

Result look wrong, or not sure what to change? A GoProIT technician can check it with you over a secure remote session. $59 per fix, Monday to Friday 8am to 8pm Eastern.

Book a technician(844) 734-1288

How to check for dead pixels

  1. Clean the screen first, so dust isn’t mistaken for a pixel fault.
  2. Start the full-screen test and look closely at each color for a few seconds, section by section.
  3. On black, look for dots that stay lit (stuck or hot pixels). On white, look for black dots (dead pixels).
  4. On red, green and blue, look for dots that stay a different color. That is a stuck sub-pixel.
  5. On gray, look for patches that are lighter or darker, and glow at the edges (backlight bleed).

Dead pixel or stuck pixel?

What you seeLikely faultCan it be fixed?
Black dot on every colorDead pixelNo. It’s a hardware fault; check the warranty.
Colored dot (red, green or blue) that never changesStuck sub-pixelSometimes. It can clear on its own after hours of normal use.
White dot on blackHot pixelRarely.
Speck that moves when you wipeDustYes: clean the screen.

We don’t offer a flashing “pixel fixer”: rapidly flashing colors can trigger seizures in people with photosensitive epilepsy, and the evidence that they work is weak.

Check your warranty

Most manufacturers only replace a screen when there are several dead pixels or one in the center area, under their “pixel policy”. Look up the policy for your monitor or laptop model and test new screens as soon as they arrive, while the store return window is still open.

Get an accurate result

A few minutes of setup makes the difference between spotting a single faulty pixel and missing it.

  • Use the native resolution. In Windows, open Settings > System > Display and pick the resolution marked (Recommended). A scaled resolution blurs single pixels into their neighbors and can hide a fault.
  • Turn brightness up to full for the white and color screens, then test black again at normal brightness.
  • Dim the room. Backlight bleed and stuck pixels on black are much easier to see without daylight on the screen.
  • Look straight on and from about a foot away. Go section by section from top left to bottom right, the way you’d read a page.
  • Use your phone camera as a magnifier. Zooming in on a suspect dot shows whether it’s a single pixel or a speck on the glass.

Write down what you find

If you plan to claim a warranty or return the screen, a support agent will ask for details. Collect them while the test is still open.

  1. Note which test color shows the fault, and what color the dot is.
  2. Note roughly where it is: for example “about 3 inches from the left edge, 2 inches from the top”, or in the center third of the screen.
  3. Take a clear photo with the phone close to the screen, and a second one from further away that shows where on the display it sits.
  4. Write down the model and serial number. On a laptop, they’re on the sticker underneath. On a monitor, check the back panel or the on-screen menu.
  5. Check the purchase date. Store return windows are often shorter than the manufacturer’s warranty and usually have looser rules about pixels.

Pixel policies and what counts as faulty

Every display maker publishes its own pixel policy, and they differ. Most are based on the international standard ISO 9241-307 (which replaced the older ISO 13406-2), which sorts displays into classes by how many faulty pixels are acceptable. In practice, policies usually treat bright pixels more strictly than dark ones, because a lit dot on black is far more distracting. Some manufacturers replace certain premium monitors and laptops for a single bright pixel, while budget lines may need several faults before they qualify.

Look up the policy by your exact model number on the maker’s support site before you contact them, and quote it in your request. If the screen came with a new business laptop, ask whoever supplied it to raise the claim, since they often have a faster route to the manufacturer.

Other screen faults this test helps you spot

What you seeWhich test shows itWhat it usually means
Bright patches along the edgesBlack, in a dark roomBacklight bleed on LCD screens. Mild bleed is normal; large bright corners can be a warranty issue
Glow that moves when you change viewing angleBlackIPS glow, a normal trait of IPS panels rather than a fault
Faint shape of a window or taskbar that stays putGray or whiteImage retention or burn-in, most often on OLED screens after a static image
Thin vertical or horizontal linesAny colorA panel, cable or graphics fault; see below
Cloudy, uneven patchesGrayUneven backlight, also called clouding or poor uniformity

Lines on the screen: panel or graphics?

Take a screenshot (press Windows + Shift + S) and open it on another device. If the lines aren’t in the screenshot, the graphics card is drawing a clean image and the fault is in the panel or its cable. On a laptop, you can also connect an external monitor: if the external screen is clean, the laptop display or its hinge cable is the problem. Lines that change when you move the lid point strongly to the cable.

Checking a new laptop or monitor at the office

When new equipment arrives, it’s worth ten minutes of checks before you hand it to someone and the box goes in the recycling. Run this screen test, then the keyboard tester and the webcam test, and plug in every port you plan to use. Faults found in the first week are much easier to return. If you’d like someone else to set up and check new machines, a technician can do it remotely as part of the Business Support Plan.

Frequently asked questions

How do I exit the full-screen test?

Press Esc. You can also move between colors with the arrow keys, the space bar or by clicking.

How accurate is the refresh rate reading?

It is an estimate based on how often your browser draws frames, rounded to the nearest standard rate. Battery saving and background tabs can lower it, so check Settings > System > Display > Advanced display in Windows for the exact value.

Why does my screen show stripes on the gradient?

Visible bands mean the display or graphics settings are using fewer colors than they could. Make sure the right resolution and refresh rate are set, and update the graphics driver.

Can I test a second monitor?

Yes. Drag the browser window to that monitor first, then start the test.

Do dead pixels spread?

A single dead pixel doesn’t spread to its neighbors. If new dead pixels keep appearing over weeks, that points to a wider panel problem, often from physical damage or heat, and it’s worth raising with the manufacturer while the warranty lasts.

Can pressing on a stuck pixel fix it?

People sometimes rub or press the spot with a cloth, and occasionally it helps a stuck pixel. It can also damage the layers of the panel and create more faults, and it may affect a warranty claim. Try normal use for a few days first, and contact the manufacturer before any physical fix.

Is one dead pixel normal on a new laptop?

It’s common enough that many pixel policies allow one or two, especially dark ones away from the center. Whether you can get a replacement depends on the maker’s policy for your model and on the store’s return rules.

Can I run a dead pixel test on a phone or tablet?

Yes. Open this page in the phone’s browser, start the full-screen test and tap to move between colors. Turn on auto-rotate lock first so the screen doesn’t flip while you check it.

Related guides

Display problems at the office?We troubleshoot monitors, docks and graphics drivers remotely.
Get help from a technician

More free tools

See all 30 free IT tools

Free tools find it. We fix it.

Want a technician to sort it out for you?

One-time remote fix for $59, or unlimited help for your whole team at $49 per user per month. No contract and no setup fee.

WhatsApp us(202) 960-2022 · messages