Free email deliverability test
Email Domain Health Check
Enter your domain to test MX, SPF, DKIM, DMARC and 14 email blocklists at once. You get a score out of 100 and a plain-English fix list.
Free, no sign-up. We only read public DNS records and do not keep what you check.
Result look wrong, or not sure what to change? A GoProIT technician can check it with you over a secure remote session. $59 per fix, Monday to Friday 8am to 8pm Eastern.
Book a technician(844) 734-1288What this test checks
| Check | Why it matters | Points |
|---|---|---|
| MX records | Where your incoming email is delivered. Missing or leftover records lose mail. | 15 |
| SPF | Lists the servers allowed to send as your domain. Must be a single record with no more than 10 DNS lookups. | 25 |
| DKIM | A digital signature on every message that proves it wasn’t changed and really came from you. | 20 |
| DMARC | Tells receivers what to do with mail that fails SPF and DKIM, and sends you reports. | 30 |
| Blocklists | Checks your mail server IPs against 14 public DNS blocklists. | 10 |
A warning scores half points. BIMI, MTA-STS and TLS reporting are shown as extras but don’t affect the score, because most small businesses don’t need them yet.
Why your score matters now
Since February 2024, Gmail and Yahoo require SPF or DKIM from every sender, and SPF, DKIM and DMARC from anyone sending more than 5,000 messages a day. Microsoft brought similar rules to Outlook.com in May 2025. Mail that fails these checks is pushed to spam or rejected outright, often with errors like 550 5.7.26.
Even if you send far less than that, a missing DMARC record means anyone can send email that looks like it came from your domain. That is how most invoice-fraud and fake-payment emails reach your customers.
How to read your result
- 90 to 100: well protected. Your records are correct. Re-check after you add any new service that sends email for you (newsletter, CRM, invoicing).
- 60 to 89: needs attention. Usually DMARC is still at p=none, or DKIM isn’t turned on. Mail mostly arrives, but you are open to spoofing.
- Under 60: at risk. Something important is missing or broken. Expect some legitimate mail to land in spam.
Open each section for details. Every problem comes with a fix and, where we have one, a step-by-step guide.
DNS health check or inbox placement test: which one you need
An email deliverability test can mean two different things, and it helps to know which one you are running.
This tool is a DNS health check. It reads the public records for your domain and tells you whether receivers can verify your mail. It is fast and repeatable, and it finds the problems that cause most small-business spam issues: a missing DMARC record, DKIM that was never switched on, or two SPF records fighting each other.
An inbox placement test is different. You send a real message to a set of test mailboxes and see where it lands: inbox, spam or nowhere. That tells you how your content and reputation are treated, which DNS records alone can’t show.
You can run a rough placement test yourself in ten minutes, for free:
- Create or borrow three personal mailboxes: one Gmail, one Outlook.com and one Yahoo.
- Send each one a normal business email from your work account. Use a real message, such as a quote or an invoice reminder, not “test”.
- Check the inbox, the spam folder and, in Gmail, the Promotions tab.
- Repeat with mail sent from any other system that uses your domain, such as your newsletter tool or accounting software.
If the DNS check scores well but mail from one system lands in spam, the problem is usually that system, not your main mailbox.
How to check SPF, DKIM and DMARC on a real email
The score above tells you your records are published correctly. To confirm a specific message actually passed, look at its headers.
In Gmail
Open the message you received, click the three-dot menu next to Reply, and choose Show original. At the top you’ll see three lines: SPF, DKIM and DMARC, each marked PASS, FAIL or NEUTRAL, with the domain that was checked.
In Outlook
In Outlook on the web, open the message, click the three dots, then View and View message details. In classic Outlook for Windows, open the message and go to File, Properties, and read the Internet headers box. Look for a line starting Authentication-Results:.
What a healthy result looks like
You want something like this:
spf=pass smtp.mailfrom=yourcompany.com; dkim=pass header.d=yourcompany.com; dmarc=pass header.from=yourcompany.com
The detail that matters is the domain after header.d=. If DKIM passes but shows header.d=sendgrid.net or header.d=yourtenant.onmicrosoft.com, the signature belongs to someone else’s domain and won’t count toward DMARC. Paste the full header into the email header analyzer if you’d rather not read it by hand.
Fixing a low score: the order that works
When several things are broken, fix them in this order. Each step builds on the one before it, and doing DMARC first is how people end up blocking their own invoices.
| Step | What to do | Where |
|---|---|---|
| 1. MX | Remove MX records left over from an old provider so only your current one remains. | Your DNS host (GoDaddy, Cloudflare, Namecheap and so on) |
| 2. SPF | Make one SPF record that includes every service that sends as you. Merge, don’t add. | Your DNS host, TXT record at @ |
| 3. DKIM | Turn on signing for your main mailbox provider, then for each other sender. | Microsoft Defender portal, or Google Admin console under Apps, Google Workspace, Gmail, Authenticate email |
| 4. DMARC | Publish p=none with a report address and watch the reports for 2 to 4 weeks. | Your DNS host, TXT record at _dmarc |
| 5. Tighten | Move to p=quarantine, then p=reject, once every real sender passes. | Same DMARC record |
Run this health check again after each step. Most changes show up within a few minutes, so you can confirm one fix before starting the next.
Domain reputation: the part DNS can’t fix
Once your records are correct, inbox placement comes down to reputation. Mailbox providers track how recipients react to your mail: how often they open it, delete it unread, or click “Report spam”.
Two free sources show you what the big providers see:
- Google Postmaster Tools. Sign in with any Google account, add your domain and verify it with a TXT record. After you send enough mail to Gmail users, it shows your user-reported spam rate. Google asks bulk senders to keep that rate below 0.1% and never let it reach 0.3%.
- Microsoft SNDS. Shows data for IP addresses you control. It’s useful if you run your own mail server, but not if you send through Microsoft 365 or Google Workspace, because those IPs belong to them.
If you want to check an IP for spam listings directly, use the email blacklist check. It tests one IP or domain in more detail than the summary on this page.
A typical small-business result, explained
Here’s a common pattern. A 12-person firm uses Microsoft 365 for mail, a newsletter tool for monthly updates, and accounting software that emails invoices “from” the office address. Their score comes back at 55.
The breakdown: SPF includes Microsoft but not the other two services. DKIM is off in Microsoft 365, so mail is signed with the onmicrosoft.com domain. There’s no DMARC record at all. Customers say invoices sometimes land in junk.
The fix takes about an hour of work spread over a few weeks. Add the newsletter and accounting includes to SPF (if their help pages ask for one), switch on DKIM in Microsoft 365, set up domain authentication inside the newsletter tool, then publish DMARC at p=none. After a month of clean reports, move to quarantine. The score climbs into the 90s, and the invoices stop going missing.
If you’d rather not touch DNS yourself, a technician can make these changes with you over a remote session for $59 per issue through our remote support service.
Frequently asked questions
Is this email deliverability test free and safe to use?
Yes. It is free with no sign-up. The tool only reads public DNS records for the domain you enter, the same records every mail server on the internet reads. It never sends email and we do not store the domains you check.
Why can’t the test find my DKIM record?
DKIM records live under a name called a selector, and a selector can be anything. We try the 17 most common ones, including selector1 and selector2 for Microsoft 365 and google for Google Workspace. If your provider uses a different name, find the s= value in the DKIM-Signature header of an email you sent and check it with the DKIM checker.
Does a score of 100 guarantee my email reaches the inbox?
No. Correct DNS records are the entry ticket, not a guarantee. Inbox placement also depends on your sending reputation, how many recipients mark you as spam, and the content of the message. But with broken records, good content won’t save you.
Why is my score different on other tools?
Every tool weighs things differently and checks a different set of blocklists. Focus on the individual problems rather than the number: a missing DMARC record or two SPF records is a real problem everywhere.
How long do DNS changes take to show up here?
Most changes appear within minutes, but it depends on the TTL (time to live) of the old record, which can be up to 24 hours. Results here are cached for five minutes, so wait a few minutes before checking again.
How do I test if my emails are going to spam?
Send a normal business email to personal Gmail, Outlook.com and Yahoo addresses and check where each one lands, including the spam folder. Then open the copy in Gmail and use Show original to see whether SPF, DKIM and DMARC passed. If they pass and the message still goes to spam, look at your content, links and sending reputation.
What is a good email deliverability rate?
For normal one-to-one business email, almost every message should reach the inbox. If clients regularly find your messages in junk, something is wrong. For newsletters, a few messages landing in spam is common, but a sudden drop in opens usually means a reputation or authentication problem worth checking here.
Is this score the same as a spam score?
No. A spam score, such as the one SpamAssassin produces, rates a single message based on its content, headers and links. This score rates your domain’s DNS setup. A message can score badly for content even when the domain scores 100, so use both kinds of test if you send marketing mail.
Why does my email go to spam when SPF, DKIM and DMARC all pass?
Authentication only proves the mail is really from you. Receivers still judge whether recipients want it. Common causes are a new domain with no sending history, a list that includes old or bought addresses, link shorteners, or a sudden jump in volume. A recipient adding you to their contacts or marking you “Not spam” also helps over time.
Can I check my domain reputation for free?
Yes, partly. Google Postmaster Tools is free and shows your spam rate with Gmail users once you send enough mail. Blocklist checks are also free. There is no single public reputation number that every provider uses, so treat any one score as a rough guide.
Related guides
- Emails going to spam: how to fix it
- How to set up an SPF record
- How to set up DMARC
- Fix Gmail error 550 5.7.26 (unauthenticated email)
- Email authentication failed: causes and fixes
Get help from a technician
More free tools
Email & domainMX Record LookupSee which mail servers receive email for a domain, their priority, IPs and provider.Open tool
Email & domainSPF Record Checker & GeneratorValidate your SPF record, count the 10-lookup limit and build a new record.Open tool
Email & domainDMARC Checker & Record GeneratorCheck your DMARC policy and reports, and generate a DMARC record.Open tool
Email & domainDKIM Record CheckerFind and test DKIM keys by selector, including key size and revoked keys.Open tool
Email & domainEmail Blacklist CheckCheck a mail server IP or domain against 14 email blocklists.Open tool
Email & domainFree Email Signature GeneratorBuild a clean HTML signature and paste it into Outlook, Gmail or Apple Mail.Open tool
Email & domainEmail Header AnalyzerPaste email headers to see authentication results, spam verdicts and delivery delays.Open tool
DNS & websiteDNS LookupSee every DNS record for a domain or hostname: A, MX, TXT, CNAME, NS and more.Open tool Free tools find it. We fix it.
Want a technician to sort it out for you?
One-time remote fix for $59, or unlimited help for your whole team at $49 per user per month. No contract and no setup fee.