Free DMARC checker
DMARC Checker & Record Generator
See whether your domain has a DMARC policy, what it tells receivers to do, and where reports go. Then build the right record.
Free, no sign-up. We only read public DNS records and do not keep what you check.
Result look wrong, or not sure what to change? A GoProIT technician can check it with you over a secure remote session. $59 per fix, Monday to Friday 8am to 8pm Eastern.
Book a technician(844) 734-1288DMARC record generator
Pick a policy and a report address. Add the result as a TXT record named _dmarc.
What DMARC does
DMARC ties SPF and DKIM to the From address your recipients actually see. A message passes DMARC when SPF or DKIM passes and the domain it checked matches the From domain. Your DMARC record then tells receivers what to do with messages that fail, and where to send daily reports.
The three policies
| Policy | What happens to failing mail | When to use it |
|---|---|---|
p=none | Delivered as normal. You only get reports. | The first 2 to 4 weeks, while you find every service that sends as you. |
p=quarantine | Sent to spam or junk. | Once reports show your real mail passes. |
p=reject | Refused outright. | The goal. Spoofed mail never reaches anyone. |
Staying at p=none forever is the most common mistake: it meets the Gmail and Yahoo minimum for bulk senders, but it doesn’t stop a single spoofed email.
Tags you’ll see in a DMARC record
rua=where daily aggregate reports go. Without it you are flying blind.pct=the percentage of failing mail the policy applies to. Useful for a gradual rollout.sp=a separate policy for subdomains.adkim=andaspf=relaxed (r, the default) or strict (s) alignment.
How to read a DMARC record, tag by tag
When you run a DMARC lookup, the checker shows the TXT record published at _dmarc.yourcompany.com. A typical one looks like this:
v=DMARC1; p=quarantine; sp=reject; pct=100; rua=mailto:dmarc@yourcompany.com; fo=1
Read it left to right:
v=DMARC1must come first, exactly like that. If it’s missing or in the wrong place, receivers ignore the whole record.p=quarantinesends failing mail to spam.sp=rejectapplies a stricter policy to subdomains, which is handy if they never send mail.pct=100applies the policy to all failing mail.rua=is where daily summary reports go.fo=1asks for failure reports when either SPF or DKIM fails, instead of only when both fail. Few receivers send these reports, so it changes little.
Errors the DMARC checker flags most often
| Problem | Why it happens | Fix |
|---|---|---|
| No record found | Never created, or added at the wrong name. | Add a TXT record named _dmarc. |
Record at _dmarc.yourcompany.com.yourcompany.com | You typed the full name, and the DNS host added the domain again. | Edit the name to just _dmarc. |
| Two DMARC records | A new service told you to “add” one. | Keep one record. Receivers ignore DMARC when there are two. |
| Reports going to another company’s domain aren’t arriving | That domain hasn’t published permission to receive them. | The report service must publish a record at yourcompany.com._report._dmarc.theirdomain.com. Reputable services do this for you. |
A safe DMARC rollout plan for a small business
Going straight to p=reject is how invoices and password resets quietly vanish. This timeline works for most offices with 5 to 50 people:
- Week 1: publish
v=DMARC1; p=none; rua=mailto:dmarc@yourcompany.com. Make sure SPF and DKIM are already in place for your main mailbox provider. - Weeks 2 to 4: read the reports. List every service sending as your domain: Microsoft 365 or Google Workspace, your newsletter tool, accounting software, your website’s contact form, the office copier.
- Fix each failing sender. Usually that means turning on DKIM in the service’s domain authentication settings.
- Week 5: move to
p=quarantine; pct=25. Only a quarter of failing mail is affected, which limits the damage if you missed something. - Weeks 6 to 8: raise
pctto 100, then switch top=rejectonce reports stay clean for two weeks.
Keep the rua address after you reach reject. Reports are how you spot a new tool someone in the office signed up for without telling you.
Alignment: why DMARC fails when SPF and DKIM pass
This confuses almost everyone the first time. DMARC doesn’t just ask “did SPF or DKIM pass?” It asks whether the domain that passed matches the domain in the visible From address.
Take a newsletter sent from info@yourcompany.com through a mailing service:
- SPF passes, but for the service’s own bounce domain, such as
bounces.mailservice.com. Not aligned. - DKIM passes, but the signature says
d=mailservice.com. Not aligned. - Result: DMARC fails, even though both checks show “pass”.
The fix is to complete the service’s domain authentication, so it signs with d=yourcompany.com. With the default relaxed alignment (adkim=r), a signature from a subdomain such as em.yourcompany.com also counts. Strict alignment (adkim=s) needs an exact match, and most small businesses don’t need it.
How to read DMARC aggregate reports
Each report is a small XML file, usually zipped, sent once a day by receivers like Google and Microsoft. Inside you’ll find three parts: who sent the report and for which dates, your policy as they saw it, and one row per sending IP address.
For each row, check four things: the source IP, how many messages it sent, whether SPF and DKIM passed with alignment, and what the receiver did (delivered, quarantined or rejected). Then sort the rows into three groups:
- Your services, passing: nothing to do.
- Your services, failing: fix their DKIM or SPF before tightening the policy.
- IPs you don’t recognize: often spoofing, but also forwarding. Mail sent to a client who forwards it to a personal address can fail SPF on the second hop. A handful of these is normal.
Reading XML by hand gets old quickly. A free report parser or your IT provider can turn it into a simple table. If you’d like a technician to review your reports and move your policy to reject, that can be done over remote support for $59 per issue.
Adding the record at common DNS hosts
- GoDaddy: domain’s DNS page, Add New Record, type TXT, name
_dmarc. - Cloudflare: DNS, Records, Add record, type TXT, name
_dmarc. Cloudflare shows the full name after you save, which is expected. - Namecheap: Advanced DNS, Add New Record, TXT Record, host
_dmarc.
Paste the value without quotation marks; the DNS host adds them where needed. Then run the DMARC checker again. Your SPF and DKIM should also be correct, so check them with the SPF record checker and DKIM checker first.
Frequently asked questions
Where do I add a DMARC record?
At your DNS host, as a TXT record with the host or name _dmarc. Most DNS hosts add your domain automatically, so enter just _dmarc. The value starts with v=DMARC1.
Do I need DMARC if I only send a few emails a day?
Yes. The bulk-sender rules only force it above 5,000 messages a day, but DMARC is what stops criminals sending fake invoices that look like they came from your domain. That risk has nothing to do with how much you send.
Will p=reject block my own email?
It can if a service that sends as you (a newsletter, CRM or billing tool) isn’t set up with SPF or DKIM for your domain. That is why you start at p=none, read the reports, fix those senders, then tighten the policy.
What do I do with DMARC reports?
They arrive as zipped XML files that are hard to read by hand. Send them to a mailbox you can forward to a free DMARC report service, or ask your IT provider to review them. Look for your real services failing, and for unknown servers sending as you.
Do subdomains need their own DMARC record?
No. If a subdomain has no DMARC record of its own, receivers use the one on your main domain, with the sp= policy if you set one. You only need a separate record if you want a subdomain to have its own report address or a different policy.
What does “dmarc=fail” mean in an email header?
It means neither SPF nor DKIM passed with a domain that matches the From address. Look at the same header for the SPF and DKIM lines: they’ll show which domain was checked. If it’s your own mail, the sending service needs DKIM set up for your domain.
What are DMARC forensic (ruf) reports?
They’re copies or summaries of individual failing messages, requested with the ruf= tag. Many large receivers, including Gmail, don’t send them because of privacy concerns. The daily aggregate reports from rua= are what you’ll actually use.
Does DMARC stop look-alike domains?
No. DMARC only protects your exact domain. A scammer who registers yourcornpany.com with “rn” in place of “m” can publish their own valid records. Staff training and checking sender addresses carefully are the defense against that.
How long does it take to reach p=reject?
For most small businesses, six to eight weeks. The time goes on finding and fixing every service that sends as you. An office that only uses Microsoft 365 or Google Workspace, with nothing else sending, can often get there in two or three weeks.
Related guides
- How to set up DMARC, step by step
- How to set up an SPF record
- Emails going to spam: how to fix it
- How to tell if your business has been hacked
Get help from a technician
More free tools
Email & domainEmail Domain Health CheckOne check for MX, SPF, DKIM, DMARC and blocklists, with a score out of 100 and a fix list.Open tool
Email & domainMX Record LookupSee which mail servers receive email for a domain, their priority, IPs and provider.Open tool
Email & domainSPF Record Checker & GeneratorValidate your SPF record, count the 10-lookup limit and build a new record.Open tool
Email & domainDKIM Record CheckerFind and test DKIM keys by selector, including key size and revoked keys.Open tool
Email & domainEmail Blacklist CheckCheck a mail server IP or domain against 14 email blocklists.Open tool
Email & domainFree Email Signature GeneratorBuild a clean HTML signature and paste it into Outlook, Gmail or Apple Mail.Open tool
Email & domainEmail Header AnalyzerPaste email headers to see authentication results, spam verdicts and delivery delays.Open tool
DNS & websiteDNS LookupSee every DNS record for a domain or hostname: A, MX, TXT, CNAME, NS and more.Open tool Free tools find it. We fix it.
Want a technician to sort it out for you?
One-time remote fix for $59, or unlimited help for your whole team at $49 per user per month. No contract and no setup fee.