Free screen test
Dead Pixel & Monitor Test
Fill your screen with solid colors to spot dead or stuck pixels, uneven backlight and banding. Ideal for checking a new monitor or laptop before the return window closes.
Result look wrong, or not sure what to change? A GoProIT technician can check it with you over a secure remote session. $59 per fix, Monday to Friday 8am to 8pm Eastern.
Book a technician(844) 734-1288How to check for dead pixels
- Clean the screen first, so dust isn’t mistaken for a pixel fault.
- Start the full-screen test and look closely at each color for a few seconds, section by section.
- On black, look for dots that stay lit (stuck or hot pixels). On white, look for black dots (dead pixels).
- On red, green and blue, look for dots that stay a different color. That is a stuck sub-pixel.
- On gray, look for patches that are lighter or darker, and glow at the edges (backlight bleed).
Dead pixel or stuck pixel?
| What you see | Likely fault | Can it be fixed? |
|---|---|---|
| Black dot on every color | Dead pixel | No. It’s a hardware fault; check the warranty. |
| Colored dot (red, green or blue) that never changes | Stuck sub-pixel | Sometimes. It can clear on its own after hours of normal use. |
| White dot on black | Hot pixel | Rarely. |
| Speck that moves when you wipe | Dust | Yes: clean the screen. |
We don’t offer a flashing “pixel fixer”: rapidly flashing colors can trigger seizures in people with photosensitive epilepsy, and the evidence that they work is weak.
Check your warranty
Most manufacturers only replace a screen when there are several dead pixels or one in the center area, under their “pixel policy”. Look up the policy for your monitor or laptop model and test new screens as soon as they arrive, while the store return window is still open.
Get an accurate result
A few minutes of setup makes the difference between spotting a single faulty pixel and missing it.
- Use the native resolution. In Windows, open Settings > System > Display and pick the resolution marked (Recommended). A scaled resolution blurs single pixels into their neighbors and can hide a fault.
- Turn brightness up to full for the white and color screens, then test black again at normal brightness.
- Dim the room. Backlight bleed and stuck pixels on black are much easier to see without daylight on the screen.
- Look straight on and from about a foot away. Go section by section from top left to bottom right, the way you’d read a page.
- Use your phone camera as a magnifier. Zooming in on a suspect dot shows whether it’s a single pixel or a speck on the glass.
Write down what you find
If you plan to claim a warranty or return the screen, a support agent will ask for details. Collect them while the test is still open.
- Note which test color shows the fault, and what color the dot is.
- Note roughly where it is: for example “about 3 inches from the left edge, 2 inches from the top”, or in the center third of the screen.
- Take a clear photo with the phone close to the screen, and a second one from further away that shows where on the display it sits.
- Write down the model and serial number. On a laptop, they’re on the sticker underneath. On a monitor, check the back panel or the on-screen menu.
- Check the purchase date. Store return windows are often shorter than the manufacturer’s warranty and usually have looser rules about pixels.
Pixel policies and what counts as faulty
Every display maker publishes its own pixel policy, and they differ. Most are based on the international standard ISO 9241-307 (which replaced the older ISO 13406-2), which sorts displays into classes by how many faulty pixels are acceptable. In practice, policies usually treat bright pixels more strictly than dark ones, because a lit dot on black is far more distracting. Some manufacturers replace certain premium monitors and laptops for a single bright pixel, while budget lines may need several faults before they qualify.
Look up the policy by your exact model number on the maker’s support site before you contact them, and quote it in your request. If the screen came with a new business laptop, ask whoever supplied it to raise the claim, since they often have a faster route to the manufacturer.
Other screen faults this test helps you spot
| What you see | Which test shows it | What it usually means |
|---|---|---|
| Bright patches along the edges | Black, in a dark room | Backlight bleed on LCD screens. Mild bleed is normal; large bright corners can be a warranty issue |
| Glow that moves when you change viewing angle | Black | IPS glow, a normal trait of IPS panels rather than a fault |
| Faint shape of a window or taskbar that stays put | Gray or white | Image retention or burn-in, most often on OLED screens after a static image |
| Thin vertical or horizontal lines | Any color | A panel, cable or graphics fault; see below |
| Cloudy, uneven patches | Gray | Uneven backlight, also called clouding or poor uniformity |
Lines on the screen: panel or graphics?
Take a screenshot (press Windows + Shift + S) and open it on another device. If the lines aren’t in the screenshot, the graphics card is drawing a clean image and the fault is in the panel or its cable. On a laptop, you can also connect an external monitor: if the external screen is clean, the laptop display or its hinge cable is the problem. Lines that change when you move the lid point strongly to the cable.
Checking a new laptop or monitor at the office
When new equipment arrives, it’s worth ten minutes of checks before you hand it to someone and the box goes in the recycling. Run this screen test, then the keyboard tester and the webcam test, and plug in every port you plan to use. Faults found in the first week are much easier to return. If you’d like someone else to set up and check new machines, a technician can do it remotely as part of the Business Support Plan.
Frequently asked questions
How do I exit the full-screen test?
Press Esc. You can also move between colors with the arrow keys, the space bar or by clicking.
How accurate is the refresh rate reading?
It is an estimate based on how often your browser draws frames, rounded to the nearest standard rate. Battery saving and background tabs can lower it, so check Settings > System > Display > Advanced display in Windows for the exact value.
Why does my screen show stripes on the gradient?
Visible bands mean the display or graphics settings are using fewer colors than they could. Make sure the right resolution and refresh rate are set, and update the graphics driver.
Can I test a second monitor?
Yes. Drag the browser window to that monitor first, then start the test.
Do dead pixels spread?
A single dead pixel doesn’t spread to its neighbors. If new dead pixels keep appearing over weeks, that points to a wider panel problem, often from physical damage or heat, and it’s worth raising with the manufacturer while the warranty lasts.
Can pressing on a stuck pixel fix it?
People sometimes rub or press the spot with a cloth, and occasionally it helps a stuck pixel. It can also damage the layers of the panel and create more faults, and it may affect a warranty claim. Try normal use for a few days first, and contact the manufacturer before any physical fix.
Is one dead pixel normal on a new laptop?
It’s common enough that many pixel policies allow one or two, especially dark ones away from the center. Whether you can get a replacement depends on the maker’s policy for your model and on the store’s return rules.
Can I run a dead pixel test on a phone or tablet?
Yes. Open this page in the phone’s browser, start the full-screen test and tap to move between colors. Turn on auto-rotate lock first so the screen doesn’t flip while you check it.
Related guides
- Laptop screen flickering: how to fix it
- Second monitor not detected: how to fix it
- Monitor says no signal: how to fix it
- Laptop screen black but still running
Get help from a technician
More free tools
PC & hardwareMicrophone TestLive level meter, waveform and record-and-playback for any microphone.Open tool
PC & hardwareWebcam TestCheck your camera, its real resolution and frame rate, and take a test photo.Open tool
PC & hardwareKeyboard & Mouse TesterCheck every key, mouse button and scroll wheel, and spot double-click faults.Open tool
Email & domainEmail Domain Health CheckOne check for MX, SPF, DKIM, DMARC and blocklists, with a score out of 100 and a fix list.Open tool
Email & domainMX Record LookupSee which mail servers receive email for a domain, their priority, IPs and provider.Open tool
Email & domainSPF Record Checker & GeneratorValidate your SPF record, count the 10-lookup limit and build a new record.Open tool
Email & domainDMARC Checker & Record GeneratorCheck your DMARC policy and reports, and generate a DMARC record.Open tool
Email & domainDKIM Record CheckerFind and test DKIM keys by selector, including key size and revoked keys.Open tool Free tools find it. We fix it.
Want a technician to sort it out for you?
One-time remote fix for $59, or unlimited help for your whole team at $49 per user per month. No contract and no setup fee.