
When Windows shows your Wi-Fi or Ethernet as connected with No internet underneath, it means the PC joined the local network but failed Windows’ own internet test. That test, called the Network Connectivity Status Indicator (NCSI), asks a Microsoft server for a tiny text file. If the right reply doesn’t come back, you get the No internet label.
Two very different situations produce the same label. In the first, nothing loads, so something between the PC and the internet really is broken. In the second, websites open fine and only the test fails, usually because a proxy, firewall or VPN is in the way. Office apps and other programs that ask Windows if the PC is online can still act offline in that case.
So open a website before you change anything. Whether it loads tells you which half of this page you need.
Try these first
- Open a website in your browser: if pages load, the internet works and only Windows’ test is failing.
- On hotel, clinic or guest Wi-Fi, open a browser and look for a sign-in page before anything else.
- Disconnect any VPN and check Settings > Network & internet > Proxy for a proxy nobody set up on purpose.
- Run
ipconfig: an IPv4 address starting with 169.254 means the PC never got an address from the router. - Check whether other devices on the same network are online; if none are, restart the modem and router.
- Restart the PC with Restart, not Shut down.
What the No internet label actually tests
Microsoft documents how the test works. Since Windows 10 version 1607, the PC sends a plain HTTP request to www.msftconnecttest.com/connecttest.txt and expects the reply Microsoft Connect Test. On Windows 11 it always uses that web test; the DNS lookup you might see first only finds where to send it. Windows also watches ordinary traffic in the background and can upgrade the status if real internet traffic is flowing.
You can run the same check yourself: type http://www.msftconnecttest.com/connecttest.txt into a browser. If you see the words Microsoft Connect Test, the internet path works. If you land on a hotel or guest login page instead, you’re behind a captive portal. If it fails to load at all, the connection really is down.
The status matters beyond the icon. Microsoft notes that Office uses this same Windows check, so Outlook, Word or Teams can claim to be offline while the browser works. Microsoft also warns against turning the test off to make the message go away, because background checks alone miss real outages.
Match what you see to the cause
| What you see | Likely cause | Where to go |
|---|---|---|
Nothing loads; ipconfig shows an address starting 169.254 | The PC never got an address from the router | Address problems |
| Nothing loads; normal address; phones on the same Wi-Fi work | This PC: proxy, VPN, security software or DNS | Proxy, VPN and security leftovers |
| Nothing loads on any device on this network | Router, modem or provider outage | Outages and when to get help |
| Websites load, but Windows and Office say offline | Something blocks Windows’ test: proxy, firewall, web filter or VPN | Office networks section |
| Public or guest Wi-Fi, nothing loads | A sign-in page hasn’t been completed | Captive portals |
| Windows reports an IP address conflict | Two devices using the same address | Address problems |
| Started right after uninstalling a VPN or filtering app | Leftover proxy settings or virtual adapters | Proxy, VPN and security leftovers |
| Wi-Fi itself keeps dropping and coming back | An unstable wireless link | Our Wi-Fi keeps disconnecting guide |
If Windows says you’re online but Chrome shows DNS_PROBE_FINISHED_NO_INTERNET, use our DNS_PROBE_FINISHED_NO_INTERNET guide instead.
Captive portals and guest Wi-Fi
Hotels, airports, medical offices and many guest networks hold back internet access until you accept terms or sign in on a web page. Windows detects this when its test gets a redirect or the wrong reply, and by design it tries to open a browser to that page.
When the page doesn’t appear:
- Disconnect any VPN. The VPN can’t connect until you’ve signed in, and its attempts can hide the page.
- Open a browser and go to a plain
http://address, such as the Microsoft test address above. Securehttps://sites can’t be redirected to the login page, which is why your home page may just spin. - If your browser or Windows uses a custom secure DNS provider, switch it off briefly. Some portals only work with the network’s own DNS.
- If you’ve already signed in and it drops again later, check the network’s Random hardware address setting in its Wi-Fi properties. With Change daily, the portal may see a new device and ask again.
Address problems: 169.254 and IP conflicts
Run ipconfig /all and find your Wi-Fi or Ethernet adapter. Three lines matter: IPv4 Address, Default Gateway and DHCP Enabled.
An address starting with 169.254
Microsoft’s explanation is simple: Windows couldn’t get an IP address from the router, so it made one up that only works on the local cable or Wi-Fi. In Terminal (Admin), run ipconfig /release and then ipconfig /renew. If it still gets 169.254:
- Restart the router; its address handout (DHCP) may have hung.
- In a busy office, the router’s address pool may be full. Phones, guests and smart devices each hold an address for hours, and new arrivals get nothing. Widen the pool or shorten the lease time in the router’s DHCP settings.
- On Ethernet, try another cable and wall port. A damaged cable can light up the port without passing traffic properly.
No default gateway, or an IP conflict
A blank Default Gateway means the PC has no route out of the building. If DHCP Enabled says No, someone typed the settings by hand. Typed addresses also cause the “IP address conflict” warning when another device takes the same number.
Go to Settings > Network & internet, open the Wi-Fi network’s properties or Ethernet, find IP assignment, select Edit and choose Automatic (DHCP). Note the old values first, in case something like a scanner or accounting server depended on them. Devices that need a fixed address, such as printers, are better handled with a reservation on the router than with typed settings on the device.
Rather have a technician sort it out?
With your approval, a technician can connect remotely, run the connectivity checks on this page, and clear the address, proxy or VPN settings that leave Windows connected with no internet. A GoProIT technician can connect remotely, with your permission, and fix it while you watch. $59 per fix, Mon–Fri 8am–8pm ET.
Proxy, VPN and security leftovers
Proxy settings
Open Settings > Network & internet > Proxy. On a home or small-office PC without a proxy server, Use a proxy server under Manual proxy setup should be off, and so should Use setup script, unless your IT provider set them. Microsoft lists turning off unneeded manual proxy settings as a standard fix.
Windows keeps a second proxy setting for system services. In Terminal (Admin), netsh winhttp show proxy should say Direct access (no proxy server). If it lists a server that no longer exists, netsh winhttp reset proxy clears it. On an office network that genuinely requires a proxy, ask before resetting it.
VPNs
Microsoft notes that the test can fail while a VPN is still connecting or after it changes the PC’s routes, and that some VPN setups send all traffic through the tunnel. If “No internet” appears only with the VPN on, the tunnel or its settings are at fault. After uninstalling an old VPN, check Settings > Network & internet > Advanced network settings for leftover virtual adapters and disable any you don’t recognize.
Security software and DNS
Security suites with their own firewall or web filter can intercept the test or block traffic after a bad update. Update the product and test with web protection briefly paused, then turn it back on. If addresses look fine but names won’t resolve, work through our DNS server not responding guide.
Office networks: browsing works but Windows says offline
This is one of the most common tickets in offices with a firewall or web filter. Everything browses, but the taskbar says No internet, Office apps go into offline mode, and the Microsoft Store or Windows Update complain. Microsoft’s guidance is to check the firewall, web filter or proxy first, because they are the usual reason the test request never gets a proper answer.
- Allow it by name, not by address. Microsoft says firewall rules for this test should use host names rather than IP addresses. Since June 20, 2023 the test servers have been hosted by Akamai, so an older rule allowing a single fixed Microsoft address can break it.
- Proxy auto-config files. If your office uses a PAC file, make sure it sends
www.msftconnecttest.comto the right proxy; a missing entry is one of the causes Microsoft lists. - Don’t switch the test off. Group Policy has a Network Connectivity Status Indicator section under Computer Configuration > Administrative Templates > Network, but Microsoft advises against disabling active probing as a fix, since background checks alone can’t spot every outage.
Fixing the firewall rule once clears the warning for every PC behind it, which is far quicker than touching each machine. Firewall rules, proxy files and the odd one-PC fault are the kind of work our IT help desk handles for small offices.
Reset the network settings, in the right order
If one PC still says No internet while others on the same network are fine, reset its network settings in two stages. Write down any manual IP, DNS or proxy settings first.
Stage 1: commands
In Terminal (Admin), run Microsoft’s sequence one line at a time, then restart:
netsh winsock resetnetsh int ip resetipconfig /releaseipconfig /renewipconfig /flushdns
The Winsock reset removes add-ons that some VPN and filtering programs install, so be ready to reinstall them.
Stage 2: Network reset
On Windows 11, go to Settings > Network & internet > Advanced network settings > Network reset > Reset now. On Windows 10, it’s under Settings > Network & Internet > Status > Network reset. It removes and reinstalls every network adapter, returns other networking components to their defaults and restarts the PC about five minutes after you confirm, so save your work and have the Wi-Fi password ready in case you need it. Afterwards, set the office network back to Private if you share files or printers.
Outages, hardware and when to get help
If no device on the network gets online, check the modem’s online or internet light, then your provider’s outage page or app from a phone on cellular data. A solid light with no internet anywhere still points at the router or provider; restart the modem first, then the router.
Stop and get help when:
- One PC gets 169.254 on every network, wired and wireless. That points at its network adapter or driver.
- Ethernet shows connected but never gets a proper address, even with a known-good cable. See our Ethernet not working guide.
- Proxy or DNS settings keep changing back on their own. That can be management software, or something less friendly, and should be looked at before anything else.
If browsing works, a technician can usually still connect even while Windows says No internet. Cleaning up one PC’s proxy, VPN and address settings that way is a typical $59 fix through remote support; you approve the session first and can end it at any time.
Common questions
Why does Windows say No internet when websites still load?
Because the label comes from a specific test, not from your browsing. Windows asks a Microsoft server for a small text file, and if a proxy, firewall, web filter or VPN blocks or changes that request, Windows reports no internet even though other traffic flows. Opening http://www.msftconnecttest.com/connecttest.txt in a browser shows whether the test request gets through.
What does a 169.254 IP address mean?
It means Windows asked the network for an address and got no answer, so it assigned itself one that only works locally. The PC can see the Wi-Fi or cable, but it cannot reach the router or the internet. Restart the router, renew the address with ipconfig /release and ipconfig /renew, and check that the router is handing out addresses and its pool is not full.
Will Network reset delete my files?
No. Network reset only removes and reinstalls network adapters and their settings. Your documents, apps and accounts are untouched. You will lose any typed IP or DNS settings, and VPN clients or virtual switches may need reinstalling. Write those settings down and keep the Wi-Fi password handy before you run it.
Why does Outlook or Teams say I am offline when my browser works?
Many apps, including Microsoft Office, ask Windows whether the PC is online instead of testing for themselves. If Windows’ connectivity test is failing, those apps believe the answer even though browsing works. Fix the cause of the failed test, usually a proxy, firewall rule or VPN, and the apps come back online on their own, often after a restart.
How do I make a hotel Wi-Fi login page appear?
Disconnect your VPN, then open a browser and go to a plain http address rather than an https one. The network can only redirect unencrypted requests to its sign-in page, which is why a secure home page just spins. If it still will not appear, turn off any custom secure DNS setting in your browser and reconnect to the network.
Can my internet provider cause connected but no internet?
Yes. If the provider’s line or equipment is down, your router still runs the local Wi-Fi, so every device connects but none get online. Check the modem’s online light and the provider’s outage page from a phone on cellular data. If the outage page is clear and the light is solid, restart the modem and router before calling the provider.